Mercury PVS Props

Updated 02/07/08

Mercury PVS Propeller Tip

If you are running a Mercury Trophy propeller and are suffering from blow out on hole shot, you might try

(1) using PVS plugs with no holes in three holes and using one with a 7/16" opening in the final port hole.

This should help a lot, but if not,

(2) Send your prop in to have the cup modified.

Also the easy way to add/remove the PVS plugs is as follows:

Use a socket extension! Really. Use the male end to push the PVS plugs through the prop and the female end to insert them. A hammer usually helps with a slight tap on the socket extension.

BACK

HOME